complete roller, new condition, can supply Winston Cup engine and transmission. $14,500. Joel (864) 292-5647 (SC) 06-0 Joel Barber 306 Fairview Drive Greenville, SC 29609 Joel.Barber@worldnet.att.net 864-292-5647 (Home) 864-322-8991 (Work) 864-414-3481 (Mobile) Joel's friend in Greenville, SC John Finger 864-458-3500 NEW CELL --> 864-884-3500 2512 Laurens Road Greenville, SC 29607 johnfingerracing@msn.com Parts available: Jerico 4-Spd $3000 Ford 9" 3rd Member $ 900 Drive Shaft $ 75 Set of Tires/Wheels $ 600 Road Atlanta Instructor - Joe Fox - 704-344-0623 joefox@bellsouth.net http://www.hscra.com Suspension Setup - BASELINE HEAVY CAR: 850 lb FRONT 275 lb REAR LIGHTER CAR: 800 lb FRONT 250 lb REAR 1-1/8" FRONT BAR MOVE ALL WEIGHT TO THE REAR BILSTEIN SHOCKS: Pat McCullahy 1-877-666-7662 Mooresville, NC 03/01/02 ---> Talked with Bucky Gregory SHOCKS --> COMPRESSED = 14" EXTENDED = 22" (8" STROKE) Contact for SETUP INFO: Gene Felton @ 770-594-9660 genefeltonrestrn@mindspring.com Front Spring 900# Rear Spring 225# Swaybar 1-1/8" Camber 2-2.5 negative Caster 3-4 positve Toe 1/8" out Shock Service...send them with a Scope of Work ATT: Pat McCullahy Bilstein Shocks 293 Timber Road Mooresville, NC 28115 STORAGE: Chesapeake Self Storage 10'x20' = $139/month 107 Hissey Road Will call on Sunday 9/30 Grasonville, MD 410-827-7272 Gateway Self Storage 10'x20' = $175/month 1715 Piney Creek Road Chester, MD 410-643-4599 Thompson Creek Self Storage Incorporated 10'x20' = $135/month 1570 Marion Quimby Drive #3 on waiting list 9/25/01 Stevensville, MD 410-604-1220 Blue Oval Performance: 303-762-8298 Engine Stand w/wheels $105 Lift Plate $ 18 Canton Road Race Rear Sump "T" Pan w/Tube $315 3 Quart Accusump w/electric control $228 Stainless Steel Mounting Clamps $ 18 ==== $684 11/13/01: Rob thinks maybe a broken crankshaft. He is to send the torque specs. 12/2/01: Sure enough...crank broke between #1 main and #1 rod journal 12/5/01: Talked with Rob...let's get it apart and inspected 12/11/01: Talked with Rob again, he is going to put together a basic parts list. With this we can take the block and heads to Burtonsville Machine. 01/30/02: Received E-mail from Rob...this is parts list so far: -New Cam & lifter set -SVO specific cam block plug-bigger than std, rest of frz plugs normal -Specific head gaskets for this block -Oil pan, intake and small gaskets you will need -The late model timing set we used for block clearance, but in a -.005 size to keep the chain tight after the line hone -Blueprinted race oil pump -Timing cover -NASCAR mech fuel pump like before 01/30/02: E-mailed Rob back with another list...will follow up with phone call. 02/22/02: Called Rob and left a message. 03/05/02: Called Rob and left a message to follow the e-mail. Parts ready to ship. 03/06/02: Talked with Rob and parts went out yesterday...should arrive end of week. 03/18/02: Talked with Rob about the air flow #'s in the heads... Roush Racing: 1-877-22-ROUSH Used parts...sent Request 10/3/01 Thanks for the inquiry, The only mounts i have are for last years Winston cup cars in Roush chassis. I don't know if these will work on a std block or only on the SVO cup block. They also are made to fit our chassis. They are really easy to make and are just angle steel, for more info please call us at 1-877-22-ROUSH thanks 05/09/02 ---> Ordered Upper and Lower Control Arms 05/14/02 ---> Ordered (4) D6352 Sticker Tires...rollout circumference = 87.3" (-0.1" from D5704's) Ronnie Hopkins Engineering: R H E Inc 1630 Duncan-Reidville Rd DUNCAN, SC 29334 Phone (864)-879-6470 Fax (864)-879-6505 Look for an ID tag or stamping on the horizontal bar behind the seat on the passenger side. * After talking with Ronnie Hopkins Jr., identify Upper & Lower Control Arms!! LH RH -- -- 2 LOWER ARM 1 + 1/4 - UPPER ARM 7-1/2 1/4 3/4" Inside Frame Rail to upright 1-5/8" Upright 3/8" thick Rankin Industries, Missouri 816-532-6070 HPD 704-895-4174 / Tom Buzze $3,500 w/Long Style Rail Shifter Race Parts Distribution 704-892-8688 Yates Style Aluminium Engine Mounts $100/pair Car Cover: www.properautocare.com 1-800-628-7596 87-97 Thunderbird NOAH Custom $260 QuarterMaster: 847-540-8999 TC Race Cars ---> 800-296-3760 Bell Housing: 110-302 $390.00 Throwout Bearing: 710-100 $154.00 http://www.dfwstangs.net/tech/tranny McLeod: 714-630-2764 Tech Line: 714-630-3668 Currently running (651322-3) Magnum Clutch - FRD157 Bell Housing: Throwout Bearing: Speedway Engineering: 804-798-8245 Sway Bars---> $133 Arms---> $33/each Drop Steel $39/each Aluminium Bushings---> $6/each Rod Ends---> $9/each Measure diameter of TUBE connecting the two frames - 1-5/8" BASIC CAR SETUP: CASTER: 4* CAMBER: 2.5*R and 3.5*L Autometer Tachometers: 105-4494 5" - 10,000 rpm Single Range Tach $219.99 DR. GAS Jerry Stahl Roush Racing Header Builder: 734-779-7257 Goodyear Racing Tires: D5704 27.5"x12" 4/32" Tread Depth L&R @ Watkins Glen L&R @ Sears Point R @ Martinsville ** Also the following can be used: D5702 D5706 D5642 D5692 D5636 D5638 lockracin@charter.net scuffs $200 per set (Qty 4) used $100 per set (Qty 4) Shipping is $60 per set (Qty 4) 828-695-1050 M-F 10am-2pm EST CUP TIRE MANAGEMENT: 704-658-1000 Randy Briggs Used Sticker Tires $225/ea Call right after Road Race or Martinsville. ** 10/15/03 Called and talked with Randy... Call back after the season 11/15/03... Has info and reserving (8) 5692's or 5704's ** 11/17/03 Called and talked with Randy... New price on 5704's $125/ea Looking at 3 sets... ** 11/18/03 Ordered 3 sets, $1500 + $100 shipping Going to Gene Logic Until 5/1/04 any Goodyear NASCAR Speedway Radial can be used. Effective 5/1/04 all cars must run Goodyear Tire codes 6360 and 5704 or 6830, 6836, 6840 2004 Nextel Cup Road Course Tire Package: D6836 ---> FRONT D6840 ---> REAR Simpson Racing: 1-800-654-7223 Attention: REWEB Simpson Racing 328 FM 306 New Braunfels, TX 78130 49.95 / Set of Belts & 9.95 Shipping / Set Shippped belts out on 12/6/01 Shipped belts out 12/29/03...Simpson does not REWEB belts anymore. - They have a trade-in program, $140 for a new set. Ordered as of 1/8/04. BSR: 704-795-0901 12/4/01 - Called and ordered catalog...many type of ducts just pick one. Front brake ducts. 12/9/03 - Ordered a Modine Super Speedway oil cooler $525 Send oil one back to be sonic cleaned!! ~$100 08/10/04 - Called and talked with Mike Slattery about decals per Joe Fox. Heintz Performance: 704-455-9422 12/4/01 - Called and ordered catalog. USED WINSTON CUP RACING PARTS Jay Cushman 6 William Knight Road Windham, Maine 04062 207-892-8141 Burtonsville Machine 301-384-3595 Off of 198 in Laurel between 95 and 29 Old Gunpower Road Dropped off the engine block, pistons, heads, clutch, and balancer ** 12/19/2001 Dropped off new crank ** 1/7/2002 Talked to Chuck to communicate Rob's thoughts from his E-mail ** 1/10/2002 Talked to Chuck and he said that it will be 3 weeks before looking ** 1/24/2002 Talked with Chuck and they are in process... 2/22/02!!! Soon... Talked with Chuck and everything is done except the heads and cam plug...3/7/02 ** Should done in a week or so. Chuck called and left a message...heads have bad flow #'s 3-4 hours to port...3/18/02 ** Will check with Rob today...all worked out...Dad to deliver cam plug today. ** Called 3/22/02...will ready tomorrow ---> $2407.25 STOCK CAR PRODUCTS 800-262-8099 1/14/2002 Placed an order for the following: (1) - Aircraft style rocker switch - igition/starter in one (1) - Power steering bracket for SB Ford (1) - Willwood 7/8" master cylinder (1) - Willwood 7/8" rebuild kit (1) - Helmet Hook (1) - Safety Wire Pliers (1) - 1lb can 0.032" safety wire (3) - Hood Pins 1/22/2002 Place an order for the following: (4) - SCP223 Hub Plate O-Ring (4) - SCP241 Drive Plate O-Ring (8) - 3824 Drive Plate Screws (4) - 2168 Hub Seals (20)- GN191 Lug Nuts (2) - HPGC1 Fuel Filter Cartridges 5/21/02 Placed an order for the following: (1) - 7900 Bump Steer Gauge (1) - 7950 Toe Plates (2) - Neo Keep Cool Additive 12/5/03 Placed an order for the following: (5) - SCP2168 Rear Hub Seals (2) - Check on outer axle seals for the TUBE... JM CLIPPER - 0125 9273 H1L5 LPD (JM 9273 LUP) (1) - CJRGN12F-50 (12:1 3-HOLE MOUNT Steering Box) VALVING - MEDIUM (6) - SCP1801 Front Hub Seals (?) - Aluminum Front End Shims (6" Centers) 2 - 1/2" 2 - 1/4" MARCH PULLEYS 734-729-9070 1/14/2002 Called about 2-groove pulleys for SB Ford 3-bolt balancer $198 for crank and water pump...call back after Thursday!! 1/18/2002 - Ordered the 3-pieces set for $230 4-SPD TRANSMISSIONS Jack Finch 336-472-4499 Dale Phelon 803-643-7813 TEX Racing 910-428-9522 www.texracing.com 2268 US Highway 220, Alt. North Ether, NC 27247-0126 1/18/2002 - Talked with Patrick Ordered a Jerico 4-Spd w/4" set back Long Shifter 1st: 2.59 2nd: 1.64 3rd: 1.22 4th 1.00 Trans is from DEI, completely gone over. $2500 2/6/2002 - Talked with Rick Ordered the following: (1) 110-302 QuarterMaster Bell Housing $340 (1) 710-200 QuarterMaster Hydraulic Release Bearing $171 (1) BAT-002KIT Bellhousing Alignment Tool $135 (1) Dummy Shaft for Clutch Alignment $0 ***They are sending "std" shifter plate and set of rods*** ***Just send the old ones back ATT: RICK*** 2/12/2002 - Sent shifter plate and rods back via UPS. ***Tracking #: 1Z 292 X12 03 1604 866 0 BRAKE LIGHTS: www.yourtruckstop.com 1-888-950-2227 01/30/02 ---> Ordered: (2) TLED-4RE TruX Brand 4" LED Stop, Tail, and Turn (61 Diodes) (2) TGRO-R4 Grommets (2) TPIG-3W Pigtails 05/13/03 ---> Ordered replacement for damaged...and a spare!! IGNITION: www.nelsonspecialties.com 1-800-494-7532 02/05/02 ---> Ordered: (1) Dual Ignition Pickup - Single Pickup Splitter Cable $21.00 MUSTANGS UNLIMITED: www.mustangsunlimited.com 1-800-243-7278 (1) 656366 Bell Housing Plate $34.95 (1) 3132 Starter SB/w Manual Trans $49.95 w/$17.00 core (1) HH655 Alternator Spacer 1.5" $ 6.95 (1) M10313A302 Alternator Bracket Kit $19.95 02/20/02 ---> Ordered the above^^^ SARDESON RACING, INC: www.sardesonracing.com 1-800-722-2845 (2) FEL-2302 Fel-PRO 9" Gasket Steel Core $ 27.00 03/01/02 ---> Ordered the above^^^ AFCO RACING PRODUCTS: www.AFCOracing.com 1-812-897-0900 (1) 84038 Fender Fill $ 51.95 (1) 84033 2.25" Clear Hose 2' $ 30.30 (1) 84010 Internal Adj. Regulator -8AN $ 89.00 (1) 85190 15# Oil Pressure (RED) Kit $ 20.00 (1) AQ3600AC Assortment of 20 Dust Caps $ 5.97 (1) AQ3600AP Assortment of 20 Dust Plugs $ 6.66 (1) AQ3661 Vice Jaw Inserts $ 19.33 (4) AQ2010 AN Pipe Adapter (AN-12x1/2"P) $ 36.60 (1) AQ1200 AN-12 Hose 6' $ 54.90 (4) AQ4035 AN-12 90o Fitting $114.76 (1) AQ4045 AN-12 120o Fitting $ 31.99 (1) AQ1015 AN-12 Straight Fitting $ 15.80 (5) AQ1014 AN-8 Straight Fitting $ 43.95 (1) AQ4043 AN-8 120o Fitting $ 24.50 (1) AQ0800 AN-8 Hose 3' $ 21.60 (2) AQ2007 AN Pipe Adaper (AN-8x3/8"P) $ 9.00 (1) AQ2916 AN Female Flare Swivel (AN-8) $ 14.80 (1) AQ4036 AN-16 90o Fitting $ 35.75 (1) AQ4026 AN-16 45o Fitting $ 35.75 (1) AQ1600 AN-16 Hose 3' $ 37.11 (2) 70343 RED Racer Tape $ 17.98 ======= $716.73 03/27/02 ---> Ordered the above^^^ (2) 21000-2 1000# 5-1/2"x8-1/2" F Spring (2) 25250 250# 5"x11" R Spring 05/08/02 ---> Ordered the above^^^ HEINTZ PERFORMANCE: heintzperformance.com 704-455-9422 877-562-7373 (1) 731058 -8AN w/ 1/8" NPT for Fuel Pressure $73.27 (1) 702108 Aluminum Fule Pump Fitting 5/8-18xAN-8 $ 7.23 (1) 992916 37o AN-16 Flare Cap Female $ 6.50 (2) 993204 3/8 Allen Socket Plug $ 2.44 (2) 993205 1/2 Allen Socket Plug $ 5.50 (2) 991104 1/2 Male Pipe Nipple $11.00 (1) 981603 1/8 x AN-3 Straight Flare to Pipe $ 1.64 (1) 981604 1/8 x AN-4 Straight Flare to Pipe $ 1.64 03/7/2002 ---> Ordered the above^^^ (1) RRP-12A GN HUB NUT WRENCH $37.50 (1) HPI-8M 1/8" Stainless Steel Screen $11.00 (2) ASY10178 MSD RPM Module 7000 RPM $10.50 (3) FRM-HP6 Large Capacity Racing Filter $54.69 03/27/2002 ---> Ordered the above^^^ (2) Front Rotors and (40) Bolts 12/04/2003 ---> Ordered the above^^^ SCHOENFELD HEADERS: www.schoenfeldheaders.com 479-474-7529 02/22/02 ---> Ordered (1) Set of 352N Headers 1-3/4" Tube Dia and Collector 3-1/2"x9" $179.95 If they don't fit they can be sent back: SCHOENFELD HEADERS INC. 20 CRANE HILL ROAD VAN BUREN, AR 72956 RACING BATTERIES: www.racingbatteries.com 910-582-5540 BROWN AND MILLER RACING SOLUTIONS: 704-793-4319 Ask for Wade or Penny (1) DTHD06-1-8S 1 Pin Plug/Socket Contact 60 Amp $ 3.79 (2) DTHD04-1-8P 1 Pin Recptacle/Pin Contact 60 Amp $ 7.78 (2) 0460-204-08141 Pin contact - Nickel 8-10 AWG/60 Amp $ 5.68 (1) 0462-204-08141 Socket Contact - Nickel 8-10 AWG/60 Amp $ 4.33 (1) 114008 Extractor #8 $ 2.89 02/27/02 ---> Ordered above...coming COD. BSR PRODUCTS: www.bsrproducts.com 800-432-2798 03/01/02 ---> Ordered... (2) BSR-003-F Aluminum Spindle Dual Duct 2.5" Hose $ 84.00 (2) BSR-001-402 Dual Air Duct 2.5" Hose (4.75" x 9") $ 36.00 (2) EVF-994-2-5 2.5" BLACK DUCT HOSE @ $4.38/foot (12') $105.12 ***They sent an extra set of "spindle ducts"...need to get RMA and send back for credit. 03/25/02 ---> Sent back a pair of spindle ducts... UPS Tracking #: 1Z292X12K0316060799 BSR PRODUCTS, INC. Attention: Robby 4030 Concord Parkway South Concord, North Carolina 28027 800-432-2798 RACING RADIOS: www.racingradios.com 800-272-7111 03/08/02 ---> Ordered... (1) SC-180 100 Channel Programable Scanner $180.00 (1) RT-12 Adapter from MIC/EAR to Scanner $ 13.00 (1) 405 Helmet Kit $ 89.95 (1) EAR Semi-Custom Ear Piece Kit $119.95 VIDEO CAMERA SETUPS: http://www.petefagerlin.com/video_how_to.htm http://www.interlog.com/%7Emicrovid/6000cam.htm $249 US http://www.globemail.com.au/racing/lipstick-cameras.htm http://www.globemail.com.au/racing/Racing.htm http://www.conecam.com/mounts.html TIMING/ANALSYS TOOLS: http://www.a-metrics.com/ Thank you for your business! Here is your receipt: Order Number: 1321 Comments / More Information: Ordering Instructions: Qty Name SKU Price Sub Total ------------------------------------------------------------------------ 1 LapTracker v/32 LT32 $49.95 $49.95 1 LapTracker-Mini LTMN $19.95 $19.95 ------------------------------------------------------------------------ Sub Total $69.90 Tax Total $0.00 Shipping: Online Software Delivery $0.00 Grand Total $69.90 Please come again! Store URL: http://www.a-metrics.com/store/index.html http://www.a-metrics.com/store/index.html HUTCHINSON-PAGAN: 704-597-1372 ** Ask for Bob...Brake Pads...83 Compound. ** Called 3/11/02 looking for brake spindle ducts...reffered to Dave Jensen... DAVE JENSEN: 704-662-3819 racepartdave@aol.com ** Front brake spindle ducts....sent e-mail with http link 3/11/02. PHELON MOTORSPORTS: 803-643-7813 www.phelon.com jdavis@phelon.com 03/27/02 ---> Called and talked with Tim Schmidt... ** They are to call back with some baseline chassis setup. 07/16/04 ---> Called and talked with Tim Schmidt about a new nose and hood. $250 for both. 07/20/04 ---> Called to get status...shipping Yellow Freight. $154.80 for shipping. Faxing INVOICE. @ SEBRING 2004 Dale was running the following in the #98 REAR GEAR: 4.88 8600 RPM CHIP OVER DRIVE TRANS W/1:1 3rd Gear D6836 on the front D6840 on the rear JAYDEE SUPPLY: 410-760-1100 -Ask for Bobby Performance Friction FRONT ---> PFC 7702.01.25.44, compound 01 $210 REAR ---> PFC 7751.97.20.44, compound 97 $160 7/8" Master is for the FRONT BRAKES 1" Master is for the REAR BRAKES PERFORMANCE FRICTION: 800-521-8874 Bret Gipson 7-3-03 Talked with JP @ x8703, 20% discount with HSCRA The O1 compound has been discontinued... With the 93's need maximum cooling. FRONT ---> PFC 7702.93.25.44, compound 93 $180 REAR ---> PFC 7751.97.20.44, compound 97 $122 ** Ordered a set...being shipped to VIR..pickup. 5-7-04 Ordered another FRONT set. Junior @ Heintz ---> Talk with Derick Spencer x8759 CELL #: 803-370-0681 Richard Childress Racing: 336-731-3334 Danny x353 **Used Parts... JACK FINCH RACING: 336-472-4499 336-472-4550 ---> New Shop 104 Williams Street Thomasville, NC ** Ask for Aaron flatoutracing@cs.com SETUP INFORMATION: FRONT SPRINGS: 1000# REAR SPRINGS: 250# FRONT SHOCKS: 350/160 Bilstein REAR SHOCKS: 275/110 Bilstein FRAME HEIGHT: LF=5.25", LR=6.25" RF=5.00", RR=6.00" BUMP STEER: 2" UP & 1" DOWN - 0.015" TOE-OUT CROSS WEIGHT: 50.5% w/driver on the right side as a minimum MAXIMUM = 52% NOSE WEIGHT: 50.5% w/driver TO LOOSEN THE REAR UP, RAISE THE TRACK BAR 1/2", RELEVEL AT RIDE HEIGHT TO HELP OFFSET THE TIRE BUILD UP...FRONT 23psi / REAR 20psi TO MAKE 1st GEAR USABLE ON A ROAD COURSE, 1.77 RATIO AUCTIONS: www.sentmanauctions.com - Check from time to time...used parts. CAR SETUP: http://www.theracersmall.com/setupsheetN.htm http://www.quarterscale.com/Corner-weight.htm http://www.speedpartz.com/smarttool.htm ENGINE PARTS: HEAD GASKETS: FEL-PRO 2707-1 MELLING OIL PUMP: 10688 ARP OIL PUMP SHAFT: 154-7904 MCLEOD CLUTCH DISK: 5006-07 --> 26 SPLINE FOR JERICO EDELBROCK INTAKE: 7521 --> AIR GAP CARTER FUEL PUMP: 9350 Nascar Style AN-10 & AN-8 HI-TORQUE STARTER: 397-M-11000-A50 --> Ford Motorsport from JEGS Joe Rhine: 219-845-1218 ** Engine builder for ARCA Frank Kimmel ** Jerry Hill ---> Truck team in Virginia area. Roush Engine Shop: 734-779-7257 ** Red Johnson SCAT Crank Shafts: 310-370-5501 ---> Ask for Mark Probe Industries: 310-784-2977 ---> Ask for Tim John Finger.... ** Penske Truck Engine 660HP @ 7600RPM 12:1 * 3.5-4 Hours on it w/1 Hour on new valve springs $ 9,000 ** Tony Otto Engine 598HP @ 7600RPM $ 8,500 ** PME Engine 748HP @ 7600RPM $14,000 ** Roush Plate Engine 420HP ---> Intake/CARB 647HP $ 9,500 Kooks Custom Headers: 631-586-9002 ** can build a custom header for the Yates head. PENSKE RACING: 704-664-2300 136 KNOB HILL RD MOORESVILLE, NC 28117 ENGINE SHOP: 704-782-0595 Look at the front of the engine around the distributor for a # JARVIS TETHERROW: 828-287-9818 Engine Builder...works in Jimmy Means Busch Team Means Jimmy Racing 486 Withrow Road Forest City, NC 28043 08/28/02 - Called and left a message for him to call me back...JT012 CARBURETOR JETTING: 74/84 to start...---> PUT THE 83's in the front!! VALVE SPRINGS: ISKY 9965 PSI CT1043 SPARK PLUGS: AUTOLITE 3932 or 3933 CHAMPION 57 GAP 0.035" DRY SUMP SYSTEM: If engine sits for a week the oil from the tank will siphon into the oil pan. Remove the cog belt and pump the oil from the pan into the tank...~ 2 minutes...use a right angle drill. Put the belt back on and then heat the oil up in the tank and then start the engine. The system should hold between 12-20 quarts. It is full when it is running and the oil level in the tank is 7-10 inches from the top. FRESHENING OF THE ENGINE: Every 6 hours or 600 miles ---> $6,500 New pistons, rings, bears, valves, springs, lifters. COMPRESSION RATIO: 11:1 JOEL GREWIT @ PANOZ AUTO DEVLEOPMENT: 770-867-4796 GTS CAR ---> ENGINE LIFE 60 HOURS --> REV LIMITER @ 6200 ---> WEIGHT = 3000 lbs $4,000 to freshen BOB LAUER, L and B Engine Development, Wilkes Barre, PA 570-824-7686 L & B Engine Development 247 North Washington Street Wilkes-Barre, PA 18702-4422 570-824-7686 570-417-9438 CELL # 12/26/02 - Dropped off engine, carb, headers, and other parts 01/21/03 - Called to check on status...should have estimate in couple of days. 01/31/03 - Called to check on status...still swamped next couple of days. - Engine is apart, so far nothing major wrong 02/06/03 - Received a call from Bob Lauer, estimate $2,600. - To fax the estimate, then mail a check for 1/2. 02/10/03 - Sent check for $1,300 plus (3) belts... - FAN BELT 15335 - ALT BELT 15386 - OIL PUMP 270L100 02/12/03 - L&B received the check and belts. Talked with Bob...moving along!! 03/03/03 - Called to check on status...left a message. 03/04/03 - Called to check on status...to call next week. To setup dyno time for the following week. 03/13/03 - Called to setup dyno time...need to call back 3/17. 03/17/03 - Called...9:00am Friday 3/21/03. Will call on Thursday to confirm. 08/04/03 - Dropped off engine, carb, headers...problem with #5 exhaust lifter 14.2 hours on the engine...630 miles 09/12/03 - Called to check on status...check back end of month. #5 exhaust lifter stuck...$$$ Semi-apart 10/14/03 - Called to check on status...call back after Hawaii. 11/3/03 - Called and left a message... 11/7/03 - Called and left a message...... 12/1/03 - Called and left a message with a person...!! 12/3/03 - Called, estimate $4500. - New pistons, lifters, push rods, springs - Send 1/2 ~$2500...this week. 1/9/04 - Called and left a message... 1/16/04 - Called and left a message... GARY TROUT AUTOSPORTS: 812-667-6448 gtrout@seidata.com 4180 E State Road 62 Cross Plains, IN 47017 Winston Cup, Busch, Craftsman Truck Team that runs limited races... 09/11/02 - Gary thinks we might have the wrong style oil pan. Getting some measurements to see what he has. 09/12/02 - Gary thinks it is now the engine mounts on the frame. Sending pictures of a Roush Car. 08/10/04 - Talked with Gary and sent pictures of the car...he has decals...going to work up a set. CUSHMAN COMPETITION: 207-892-8141 Jay Cushman, Jay Wm Knight Rd North Windham, ME 04062 Yates Tri-Y Headers on E-Bay...$350 ordered 9/20/02...to ship 9/23/02 ROBBIE EDDERS: 704-944-5484 Joe Gibbs Racing / USED PARTS CLARK RACING CHASSIS: 410-489-7309 Kayo Clark www.clarkracingchassis.com 09/30/02 - Spoke with Kayo and looked at car to quote different options. ~6-8 Weeks to even work on the car. TRI-Y's ---> 1-3/4" - 1-7/8" - 2", REUSE YATES TRI-Y...4-2 & 2-1 ?? 7/28/04 - Setup time to bend new front bumper bar... ---> 8:30am Friday 7/30/04 10/25/2005 - Spoke with Kayo about rollcage for '86 BMW 325e $200 deposit to hold a space on the schedule MARYLAND PERFORMANCE CENTER: 301-258-8883 George 10/03/02 - Spoke with George...will take the car up to have a look. ~1-1/2 weeks to work on the car. Call back on Thursday...10/10/02 10/17/02 - Dropped car and headers off at MPC. 10/24/02 - Picked up car...all done $1967 RACING RADIOS for SALE...Chuck Marks, 301-283-0207 ** (2) Radio setup 2 watt, plus car kit and driver setup INDUCTIVE TACHOMETER: www.alfaelectronics.com DM-9030 $85.00 Inductive Pickup $15.00 **They have other options for this meter** WIRELESS PRODUCTS: wireless-prd.com 813-963-0224 **Measure pin spacing on radio connector?? SPEEDWAY RADIOS: 610-599-8989 Rich ** Friend of Koches's... ** Good deal talk to him when ready!! TRAILER STORAGE: ATTENTION: SELF STORAGE S.E.W. FRIEL P.O. BOX 10 QUEENSTOWN, MD 21658 (410)-827-8811 $50/per month ACCESS CODE: 808188* UNIT NUMBER: 808 BRAKE BALANCE BAR ADJUSTMENT: http://www.thebrakeman.com/techtopic HUTCHENSDEVICE: http://www.hutchensdevice.com 1-800-731-4404 MOBILE 1 OIL CHESAPEAKE PETROLEUM 16821 OAKMONT AVE GAITHERSBURG, MD 20877 301-948-3150 15W-50 $25.85/CASE - 6/CASE BELL HELMET: Ordered Bell Vortex 7-3/8" FEDEX TRACKING #: 791511709365 INTERCOMP RACE SCALES: Visual Images Barry Burgoon 231 3rd Street SW Winter Haven Fl 33880 Work: (863) 297-8018 Visualsign@aol.com E-BAY SALE PRICE: $1045.00 FREIGHT SHIPPING: TARGET LOGISTICS---> $?? BARRY's GUYS ---> $83.42 Shipped out 2/20/03: R&L Carriers www.gorlc.com TRACKING #: 48397378-5 MARK CASH LARRY HEDRICK MOTORSPORTS 704-881-0410 lhmsmotors@aol.com Statesville, NC ** Race team selling off parts and tools... 04/09/03 - Purchased Jerico 4-SPD WC-4 w/shifter 04/10/03 - Mark is checking on set of turn plates KEN DILLARD RACEfab Inc. 864-876-2242 220 Quail Road Gray Court, SC 29645 KDracefab12@aol.com ** Currently working on putting #11 back together after the turn 5 incident at Road Atlanta 05/12/03 - Sent piece of front bumper cover to Ken - UPS TRACKING #: 1Z29649T0393772663 05/14/03 - Called to give the interior paint information... - Dupont Centari Acrylic Enamel - Indian Red - L80K/L84A/LM3A - 42715A 05/19/03 - Sent the following to Ken... - UPS TRACKING #: 1Z29649T0398785668 - 2-1/2" bracke duct tubing - (2) BSR brake ducts - Roll of black plastic - (2) LED Tail Lights and Gromments LARRY CARROLL nascar@dca.net TOM CARSON CARSON MOTORSPORTS 410-584-5100 CARSONWCR@aol.com 1 NORTH PARK DRIVE SUITE 102 HUNT VALLEY, MD 21030-1816 ** Drives the #20 Fina Lumina DAVID LEWIS 904-631-9470 P.O. Box 16780 Jacksonville, FL 32245 ** Drives the #25 Swisher Sweet Olds CJR 336-788-8830 Steering Boxes ---> 12:1 3-Bolt ANTIETAM AUTOMOTIVE 301-663-5105 Kevin Ordered (2) C&R25043 Front Hub Seals Order #: 65836, On 12/18/03 SEALS-IT 860-528-9660 Attention: Arnold 164 Maple Street Ellington, CT 06029 1/7/04 - Sent (2) "BLUE" INNER AXLE SEALS TO BE REBUILT UPS TRACKING #: 1Z29649T0390575275 OUTLAW DISK BRAKES 770-844-1777 1/7/04 - Ordered (2) Bridge Repair Kits for 9000 Series Calipers Mailing Address P.O. Box 150 Cumming, GA 30028 Shipping/Physical Address 1465 Ventura Drive Cumming, GA 30040 770-844-1777 Info/Tech Line 770-844-1333 Fax Line Email us at info@outlawdiscbrakes.com EMHART INDUSTRIES Source for Pop-Rivets http://www.emhart-vic.com/emhart/htm/vic.asp?code=default&vid=1,10,10,0 LAKE SPEED 704-938-4912 STOCK CAR STEEL & Aluminum Inc 704-664-3044 Contact: Greg Fornelli 801-A Performance Road Mooresville, NC 28115 USA 7-13-04 Ordered 3/8" square tubing 40'...$40 plus shipping. 7-16-04 Received 3/8" round tubing 40', need to call... 7-19-04 Re-ordered 3/8" square tubing 40' 7-23-04 Checked on order, order 1/2" 0.49, and 1-1/4" 0.120. 12-5-05 Ordered... 8' AL Tubing 0.625 OD w/0.375 ID 3' AL Tubing 3.000 OD w/0.065 wall 3' AL Tubing 2.500 OD w/0.065 wall 16' Steel Tubing 1.250 OD w/0.083 wall (DOM) ELECTRIC SCOOTERS http://www.largoscooters.com/HCF707.html ---> How to make a 36V system....FASTER!! http://www.largoscooters.com/accessories.html http://www.largoscooters.com/accessories2.html --->24V Extended Battery $125 http://www.sdscooters.com/Pacelite-707.html http://www.sdscooters.com/TuningMain.html http://www.electric-scooter-world.com/ESC01Subscriptions.HTM EYE BOLTS http://bosunsupplies.com/products2.cfm?product=S0314 7/28/04 - Ordered 2-3/8"x2-1/2" CRASH DECALS http://www.crashdaddyracingdecals.com/ ** OLD DECALS LIKE "UNOCAL 76" FORD RACING DECALS TECHNOSPORTS SOUTH 101 PERFORMANCE ROAD MOORESVILLE, NC 28115-9590 704-707-0810 (New Phone Number) 704-660-9578 ASK FOR JOE RICHARD MILLENTIME 336-625-4104 TRANSMISSION GUY...use to work for ROUSH in TRANS-AM Aaron Dudley used him. Ask for Richard. (AUTOCRAFT) Ship TRANS & SHIFTER with a Scope of Work. RM GEAR 331Rockcrusher Road Asheboro, NC 27203 RANDALL RACE PARTS 704-658-0071 176D Knob Hill Road Mooresville, NC 28117 www.randallraceparts.com * Sent off (4) OUTLAW brake calipers to be rebuilt. * 1/3/05 - Paid and being shipped back ---> $330 + shipping MDR-1004 Technical Support ---> Ask for Matt @ 419-879-7871 ON-BOARD IMAGES 727-421-9042 Ask for Mark Megan ** They do the in-car video for Hooters Pro Cup Mark says to do the following from Radio Shack: Get an old cassette mic with on/off switch. Get a small inline AMP w/external speaker. 9VDC powered and controllable output. Software ---> Final Cut Pro STEWART COMPONENTS 336-859-2555 Ask for Jack Wilson ** Ford 221-351W and SVO Small Block Stage 4 - 46113 $320 http://www.stewartcomponents.net/Merchant2/merchant.mvc?Screen=PROD&Product_Code=46113&Category_Code=FordSTG4 1970-78 and SVO Small Block. 5.700" Length 3/4" Bearing 3/4" Shaft Special Severe Duty Pump High Flow Pump Cast Aluminum Finish BRYANT MOTORSPORTS 540-387-3854 Ask for Roland rbracing@verizon.net http://ford-motorsports.com/ ----------------------------------------------------------------------------- 10/13/2005 OLD DEI JERICO TRANSMISSION GEARS: MAIN DRIVE SET = 27/22 1st ---> 34/16 ---> 2.608 2nd ---> 28/21 ---> 1.636 3rd ---> 24/24 ---> 1.227 4th ---> ---> 1.000 SPARE LMH JERICO TRANSMISSION GEARS: MAIN DRIVE SET = 29/21 1st ---> 34/16 ---> 2.833 2nd ---> 29/21 ---> 1.841 3rd ---> 24/24 ---> 1.333 4th ---> ---> 1.000 MERLIN "LIN" MITCHELL Runs the #97 John Deere car CELL: 850-567-0103 CELL: 850-224-2699 ?? WORK: 850-205-4268 lin@theblueprintshop.com MIKE GOODMAN Runs the #5 Levi Garrett car CELL: 770--713-3751 MAURICE HULL Runs the #44 Piedmont car PHONE: 336-234-0057 JOHN CLOUD 440-647-6811 jcloudsr@forestcitytech.com Forest City Technologies, Inc. Address: P.O. Box 86 299 Clay Street Wellington, OH 44090 Phone: (440)647-2115 Fax: (440)647-2644 E-Mail: sales@forestcitytech.com ED BULL Runs the #77 Jasper Car 140-C AMICKS FERRY ROAD CHAPIN, SC 29036 Blair Welding & MFG Inc 2210 Urbana Pike, Frederick, MD 21704 (301) 831-8600 DAVE ERIKSEN Ran an old ARCA Team...quit in 2003. Hesston, PA SHOP: 814-658-3639 CELL: 814-599-1210 welldoc@uplink.net T & L ENGINE DEVELOPMENT 704-888-8111 12303-A Renee Ford Road Stanfield, NC 281 http://www.tandlengines.com 347 STROKER GUYS... PARTS for Automotive Lifts Big Brian's Lift Warehouse 990 Alameda Drive Huntingtown, MD 20639 301-233-1570 1/12/2009 - Ordered approach ramp glides $26/ea 2/02/2009 - Received via USPS, to be billed later. T&D Machine Products 4859 Convair Dr.,Carson City, NV 89706 (775) 884-2292 - FAX (775) 884-3363 USED GOODYEAR TIRES: (D4590) Jim Tonseth 704-213-3382 (Goodyear Tires, $200/set) 923 North Long Street East Spencer, NC USED RACING PARTS...mainly Chevrolet...Corvette!! Sam Henderson 864-297-0313 (18 degree Chevrolet Parts) 201 Carriage Lane Simpsonville, SC